CPU Sockets: Dual LGA1366
Supported CPUs: Intel Xeon 5600 series Westmere and 5500 series Nehalem EP
QPI Speed: Up to 6.4 GT/s
Chipset: Intel 5500 Tylersburg with ICH10R
Memory Slots: 6 x 240 pin DIMM
Memory Capacity: Up to 96GB DDR3 ECC Registered or 24GB ECC or Non ECC Unbuffered
Memory Speed: 1333 / 1066 / 800 MHz
Memory Features: Memory Mirroring supported
Memory Type: DDR3 ECC Registered or ECC and Non ECC Unbuffered SDRAM
DIMM Sizes: 1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage: 1.5V or 1.35V
ECC Support: Corrects single bit errors and detects double bit errors
Advanced ECC: Supports Intel x4 and x8 Single Device Data Correction SDDC
SATA: 6 x SATA 3Gb/s via Intel ICH10R
SATA RAID Windows: RAID 0, 1, 5, 10
SATA RAID Linux: RAID 0, 1, 10
IPMI: Integrated IPMI 2.0 with virtual media and KVM over LAN
BMC Controller: Winbond WPCM450
Network Controllers: Dual Intel 82574L Gigabit Ethernet
LAN Speeds: 10BASE T, 100BASE TX, 1000BASE T
Dedicated IPMI LAN: Realtek RTL8201N
Graphics: Matrox G200eW
Super IO: Winbond 83627DHG P
USB Ports: 5 x USB 2.0 total
USB Rear: 2 ports
USB Onboard: 1 port
USB Headers: 2 headers with 2 ports
VGA Port: 1 x VGA
PS2 Ports: Keyboard and Mouse
Serial Ports: 1 rear serial port and 1 optional internal header
Expansion Slot: 2 x PCI E 2.0 x8 with one in x16 slot
Expansion Slot: 1 x PCI E 2.0 x4 in x8 slot
Expansion Slot: 1 x PCI E x4 in x8 slot
Expansion Slot: 2 x PCI 33MHz
BIOS Type: 32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: PnP, PCI 2.2, ACPI up to 3.0, USB keyboard support
Management: IPMI 1.5 and 2.0 with KVM support and SuperDoctor III
Power Management: ACPI and APM with AC power recovery
Voltage Monitoring: CPU cores, 1.8V, 3.3V, 5V, 12V, standby rails, VBAT, memory and chipset
Voltage Regulator: 4 phase switching
Fan Headers: 6 fan headers
Fan Features: Tachometer monitoring, low noise control, PWM support, 3 pin fan compatibility
Temperature Monitoring: CPU and chassis
Thermal Protection: Thermal control for all fan connectors
Security Features: Chassis intrusion detection and header
Operating Temperature: 10°C to 35°C
Non Operating Temperature: -40°C to 70°C
Operating Humidity: 8% to 90% non condensing
Non Operating Humidity: 5% to 95% non condensing
Form Factor: ATX
Dimensions: 30.5cm x 25.4cm
