Controls 4 x RS232/RS422/RS485 devices via Ethernet or Internet
LAN Interface: 10BaseT / 100BaseTx Ethernet
Driver Auto-Discovery: Automatically detects NetCom devices on network
Configuration Methods: Driver Panels, Serial Port, Telnet, Web Browser, SNMP
Automatic Mode Switching: Driver mode ↔ RAW mode
Supported Protocols: TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP v1/v2c/v3, DNS
ART Support: Automatic Receive/Transmit control
Interface Selection: RS232/RS422/RS485 selectable by switches
Processor: ARM7 TDMI 50 MHz
I/O Controller: 16C550C or compatible
Memory: 8 MB SDRAM, 1 MB Flash
Connectors: RJ45 for LAN, DB9 male for serial
LAN: Auto-detecting 10BaseT / 100BaseTx
Network Protocol Support: TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP v1/v2c/v3, DNS
Serial Interface: 4 x RS232/RS422/RS485 (switchable)
Number of Ports: 4
Max Serial Speed: Up to 921 Kbps
Available Modes: RS232 full duplex
Available Modes: RS422 full duplex
Available Modes: RS485 4-wire full duplex
Available Modes: RS485 2-wire half duplex (with echo)
Available Modes: RS485 2-wire half duplex (without echo)
Signals RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Signals RS422: Tx+/–, Rx+/–, GND
Signals RS485 2-wire: Data+/–, GND
Signals RS485 4-wire: Tx+/–, Rx+/–, GND
RS485 Data Control: ART (Automatic Receive Transmit control) or RTS
Speed RS232: Up to 460 Kbps
Speed RS422/485: Up to 921 Kbps
Parity: None, Even, Odd, Space, Mark
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
IRQ: None
I/O Address: None
