Secure and wireless operation
Controls 1 RS232/422/485 device via WLAN, Ethernet, or Internet
Secure Encryption on Ethernet & WLAN
WLAN Interface: IEEE 802.11b/g, 54 Mb/s
LAN Interface: 10BaseT / 100BaseTx Ethernet
Auto Discovery: Driver automatically finds NetCom devices
Configuration via Driver Panels, Serial Port, Telnet, Web Browser, SNMP
Automatic Mode Switching: Driver mode ↔ RAW mode
Supported Protocols: TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP v1/v2c/v3, DNS, PPP, openVPN
ART Support: Automatic Receive/Transmit Control
Serial Interface Type: RS232/422/485 selectable by switches or software
Processor: ARM9 166 MHz
I/O Controller: 16C950 or compatible
Memory: 16 MB SDRAM, 2 MB Flash
Connectors: SMA-Reverse for WLAN antenna, RJ45 for Ethernet, DB9 male for serial
WLAN Interface: IEEE 802.11b/g, max 54 Mb/s
WLAN Security: WPA2-AES, WPA-PSK/TKIP, WEP128, WEP64
WLAN Modes: Infrastructure (Access Point), Ad-hoc (PC/Laptop direct)
Ethernet Interface: Auto-detecting 10BaseT / 100BaseTx
Protocols Supported: TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP v1/v2c/v3, DNS
Serial Interface: RS232/RS422/RS485 selectable
Number of Ports: 1
Max Serial Speed: Up to 3.6 Mbps
Available Modes: RS232 full duplex
Available Modes: RS422 full duplex
Available Modes: RS485 4-wire full duplex
Available Modes: RS485 2-wire half duplex (with echo)
Available Modes: RS485 2-wire half duplex (without echo)
Signals RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Signals RS422: Tx+/–, Rx+/–, GND
Signals RS485 2-wire: Data+/–, GND
Signals RS485 4-wire: Tx+/–, Rx+/–, GND
RS485 Data Control: ART or RTS
Speed RS232: Up to 500 kbps
Speed RS422/485: Up to 3.6 Mbps
Parity: None, Even, Odd, Space, Mark
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
IRQ: None
I/O Address: None
